Dive Industry Technician Training

Course Fees 2020

 

COURSE TITLE	DAYS	FEE /Technician
DITC + GAS BLENDER/TECHNICIAN + CYLINDER TESTING PT 2	14	US$2495
DIVE INDUSTRY TECHNICIANS COURSE (DITC) INCLUDES CYLINDER TESTING CPL1(VIP)	10	US$1515
DITC + CYLINDER TESTING PT 2 (HYDRO/NDT)	12	US$2,010
ACASM ADVANCED COMPRESSOR STRIP DOWN & REBUILD COURSE *Includes 5 nights accommodation	5	US$1345
HASKELL AGT 15/30 OXYGEN BOOSTER PUMP STRIP DOWN AND REBUILD	4	US1,345
CYLINDER TESTING TECHNICIANS COURSE CPL1 + CPL2 COMBINED COURSE	4	US$950
COMPOSITE CYLINDER CPL3 INSPECTION COURSE	1	US$365
ADVANCED TECHNICIANS COURSE	3	US$745
GAS BLENDER(NITROX, HELIUM) & OXYGEN TECHNICIAN *	2	US$495
CYLINDER TESTING PT 2 (HYDRO/NDT) ONLY.	2	US$495
COMPRESSED AIR SYSTEMS MANAGEMENT COURSE (CASM)	2	US$495
YANMAR DIESEL ENGINE STRIP DOWN REBUILD COURSE	4	US$950
GAUGE CALIBRATION COURSE	1	US$285
AGA FULL FACE MASK FFM STRIP DOWN REBUILD COURSE	1	US$285
HEED, ELSA, SPARE-AIR STRIP DOWN & REBUILD COURSE	2	US$495
CMMS – COMPUTER MAINTENANCE MANAGEMENT SYSTEM FAMILIARITY COURSE – 1 day	1	US$285
ORIENTATION & ASSESEMENT COURSE (DITC FOR EXPERIENCED TECHS ONLY)	2	US$495
DIVE TECHNICIAN INTERNSHIP COURSES – 1 – 3 MONTHS	30-90	Contact for details
*NEW Bauer Compressor Manufacturer Certificate – ( Combined level 1 & 2) *Includes 4 nights accommodation	4	USD1345
Replacement Certificate/QCard set (1 Certificate + 1 Q-Card), Postage not included	–	USD25
EMS DELIVERY of replacement Certificate/Card set(s). Thailand postal address	–	USD5
EMS, DHL INTERNATIONAL delivery ZONE 1-4 of Replacement Certificate/QCard(s)	–	USD40
DHL INTERNATIONAL delivery ZONE 5 of replacement Certificate/QCards set(s)	–	USD70

Special Package Price Offer for companies sending 4 or more technicians for training

Special price for 4 or more technicians sent to us by one company booked and paid for at the same time

<<< Only US$2,245 per technician >>>

<<< must be booked and paid for at the same time >>>

* Special 20% discount Cross-over price for Gas Blender/Oxygen technicians

Completing the ASSET Gas Blender course holding over other agency certifications

Notes:

• All courses cover the latest changes in American DOT CFR/CGA plus European EN/ISO Cylinder Testing Standards
  • A Fiber wrapped/composite SCBA cylinder inspection training course(1 day) is also available on request.
• Prices, course durations and location may be subject to change for logistical reasons or Force-majeur.
• Manufacturer Training Courses Arranged through Easytek Engineering Services Co Ltd
  • Manufacturer certification Courses arranged by Easytek Engineering Services Co Ltd are run at the appointed service agent’s location:-
  • Should attending a specific factory/manufacturer’s course involve travel away from Easytek Engineering Services location then the course price for factory training courses away from Easytek’s Training facility includes transfer flights, & taxi fares unless otherwise stated in the quotation.
• Stated location/meeting point for all training courses is Easytek Engineering Services Co Ltd premises, Pattaya, Thailand.
• Custom Date (Non-Scheduled) training courses.
  • Where possible, students should plan to attend the scheduled training course dates
  • Our regular scheduled courses are always attended by several students and standard course pricing applies
  • Should you not be able to attend the scheduled DITC training course dates, it may be possible to arrange a training course with custom dates to meet your requirements.
  • Custom date courses arranged for 1-2 candidates are subject to a 20% surcharge due to the uneconomic nature of teaching small numbers of students
  • The custom dates course surcharge is waived for 3 or more candidates studying at the same time.